Kitchen worktop FAQs: practical answers for your project
Our kitchen worktop FAQs cover choosing a surface, everyday care, thickness, splashbacks and installation. Start with the questions below, then explore the full set of answers about planning your kitchen.
My Kitchen Worktop supplies bespoke surfaces and helps you plan templating and fitting. For product advice, send us your kitchen plan, postcode and preferred finish. You can also visit our Hayes showroom by appointment.
Materials and care | Splashbacks and design | Planning and fitting FAQs
Materials and care
Is Silestone the same as quartz?
Silestone is a Cosentino surface brand, while quartz is a mineral and a term commonly used for a wider group of engineered worktops. They are not interchangeable product names. Cosentino now describes Silestone as a low-silica mineral surface made with minerals and recycled materials, so check the specification of the exact colour and range.
See Cosentino’s current Silestone information and compare our worktop materials before choosing.
Can you put hot pans on quartz worktops?
Use a trivet or pan stand rather than placing hot cookware directly on quartz. Heat resistance does not make a surface heat-proof. For example, Caesarstone recommends protecting its surfaces from hot pans and sudden changes in temperature.
Follow the care instructions for your exact product, including guidance for countertop cooking appliances. See the official Caesarstone care guide for its recommendations.
How do you clean quartz worktops and Caesarstone?
For everyday care of Caesarstone quartz, wipe with a soft cloth, warm water and a mild detergent. Then rinse and dry the surface. Clean spills promptly and use the manufacturer’s approved method for stubborn marks.
Care can differ by brand and finish. Check your product’s instructions before using a stain remover, abrasive cleaner or strong chemical. The Caesarstone care guide explains its daily cleaning and stain-removal methods.
Splashbacks and design
What is an upstand in a kitchen?
An upstand is a short panel fitted along the wall at the back of a worktop. It finishes the junction between the surface and wall. A splashback normally covers a larger wall area, for example behind a sink or hob.
Discuss height, joints and sockets before fabrication. Behind a hob, also check the appliance clearances and the material’s suitability. Send us your plan to compare an upstand with a full-height splashback.
What colour splashback works with a grey kitchen?
White or pale neutral splashbacks can create a light contrast with grey cabinets. A matching grey gives a more continuous look, while a darker surface adds contrast. The best choice depends on the undertone of the cabinets, the worktop and your room’s lighting.
Compare samples beside the cabinet door and floor in daylight and artificial light. Explore our surface colours and check product suitability before choosing a panel for a cooking area.



