Prepared by the MyKitchenWorktop team · London, 2025. Practical guide: renewing a kitchen worktop with a marble-effect epoxy finish

1. Introduction – why a DIY makeover?

Updating a work surface transforms the entire kitchen: it looks brighter, feels newly fitted and increases a property’s value. Across the UK—especially in London—2025 style points to bold veining and warmer tones, while functionality remains non-negotiable. With a marble-effect epoxy kit anyone can achieve the look in one weekend, over an existing worktop, without wet trades.

Need a tailored estimate? → Request a quote.

2. 2025 colour and finish trends inspiring this project

Colour / finish	Why Londoners love it	Source
Heritage green (forest, sage)	A botanical hue that pairs with light timber and brass	here
Dramatic veining – Calacatta or Arabescato style	Graphic marble dominates islands and waterfall edges	here
Midnight & powder blues	A lighter take on navy	here
Butter-yellow neutrals (Dulux “True Joy”)	Inject optimism without overwhelming the space	here
Leather-matt texture	Organic touch that hides fingerprints	here

 

__________________________________

3. Why choose marble-effect epoxy?

• Affordable – a two-gallon kit covers c. 3.7 m² and costs about £200 + VAT; the real-world London range works out at £15 – £50 per m² .

• Lightweight, no cutting – apply over laminate, tired granite or MDF; a quick sand and degrease is all that’s needed.

• Built to last – heat and UV resistance are baked in.

• Rapid UK delivery – Neill’s Materials dispatches Stone Coat kits within 48 hours nationwide .

4. Materials and tools checklist

• Stone Coat or similar kit (resin A+B, pigments, under-coat, top-coat)

• 100 mm foam rollers and a “chop” brush

• Hot-air gun for de-gassing

• 120-220 grit abrasives, masking tape, nitrile gloves

• Organic vapour mask – the low-VOC formula is perfect for London flats

5. Step-by-step process (two-day schedule)

1. Preparation

   • Clean with a degreaser; strip old silicon.

   • Lightly sand; vacuum dust.

   • Mask sink and splashback.

2. Under-coat

   • Apply with a fine roller; allow one-hour dry time.

3. Base pour

   • Mix resin and hardener 1 : 1 at 18-22 °C.

   • Pour and spread with a 1/8-inch notched trowel to a 3 mm layer.

4. Create veins

   • Tint a small cup of resin pewter grey or charcoal.

   • Sketch S-curves; diffuse with the chop brush.

   • 

5. De-gas

   • Hover heat gun to burst bubbles.

6. Initial cure

   • Leave 24 hours dust-free at > 18 °C.

7. Protective top-coat

   • Choose high-gloss or the on-trend silky matt “quiet-luxury” sheen.

   • Touch-dry in four hours; full cure in seven days before heavy pans.

Ready to get started? → Request a quote.

6. Edges and finishing touches

A crisp edge elevates the result:

• Straight 2 mm – minimalist, easy to sand in.

• 45 ° bevel – visually lighter; use a firm guide.

• Waterfall to the floor – bond vertical panels with the same epoxy; spectacular on islands.

A “leathered” tactile matt appears if, post-cure, you buff with a fine Scotch-Brite disc before sealing .

7. Quick material comparison for London projects

(★=easy, ★★★=advanced)

8. Quick-care guide

• Use neutral cleaners; skip bleach and harsh alkalis.

• Trivets for pans above 120 °C.

• Renew the Ultimate Top Coat every three-four years if you crave high gloss .

Practical guide: renewing a kitchen worktop with a marble-effect epoxy finish

9. Project costs and timings

Total: a boutique look for £70 – £80 per m² installed—versus £435 per m² for fitted granite in London .

Unsure how many litres you need? → Request a quote today.

10. Conclusion

The MyKitchenWorktop team trusts this guide will help any London homeowner achieve a flawless marble-effect worktop aligned with 2025 colour trends at an unbeatable price. For answers, precise quantities or a professional finish, our technical advisers are one click away.

Transform your kitchen this weekend—request a quote and get started now.